Real Auto Mechanic's Guides and Recommendations.

How to repair camshaft on Hyundai Atos

Engine Specialist
Richard Walker
Do you know how to install camshaft in your auto, I’ll show you the manual how to replace camshaft very easy and efficient way!

How much does it cost to replace a camshaft sensor in a 2020 Hyundai Atos?

The average cost for a Hyundai Atos camshaft position sensor replacement is between $163 and $197. Labor costs are estimated between $48 and $60 while parts are priced between $115 and $137. This range does not include taxes and fees, and does not factor in your specific model year or unique location.

What is a camshaft Hall sensor?

A Hall-sensor can be used to measure magnetic field strength. In the use for automotive applications the sensor placed next or opposite of a permanent magnet. When a metal object passes the sensor, the magnetic field is disrupted.

Where does coolant go in a Hyundai Atos 2008?

Hyundai Atos - Coolant reservoir location - All right so this is the Hyundai Atos and today I'm going to show you where the coolant reservoir is located in this vehicle. Now I suggest you get a mechanic to fill this up for you.

Where is the camshaft sensor located on a Hyundai Atos 2005?

HOW TO REPLACE THE camshaft position sensor Hyundai Atos It's hard to get the boat. Out. It's you can only get it with a wrench. All right you see the hole right there. That's where the hole is up right there with the bodies hanging on right now.

How much does it cost to fix P0010 code on a 2008 Hyundai Atos?

Electrical or wiring problems are usually related to age and should be affordable to fix ($100). But if the P0010 code is caused by damage to major engine components like stretched timing chains or bad tensioners, the cost of fixing the problem can easily reach $300 to $500 for parts and labor.

What happens if you don't replace camshaft?

Poor Drivability. A failing camshaft position sensor begins losing its ability to quickly transfer data. Mismatched fuel delivery and ignition timing, even if off by a few milliseconds, will cause your vehicle to sputter, accelerate poorly, lack power, stall or even shut off.

How much horsepower does a cam add to a 5.7 Hemi on a Hyundai Atos 2022?

Run with the stock cam, the 5.7L Hemi produced 367 hp and 414 lb-ft of torque. After installation of the new HRT cam from Comp Cams, the power output jumped to 434 hp and 440 lb-ft of torque. The cam swap netted an impressive gain of 67 hp!

Which is better CTS or ATS?

The midsize CTS offers 13.7 cubic feet of cargo capacity in the trunk, while the smaller ATS offers 10.4 cubic feet of cargo space. In terms of seating, you'll find 40.4 inches of front headroom and 45.7 inches of front legroom in the CTS, compared to the ATS' 38.6 inches of front headroom and 42.5 inches of legroom.

When should a Cambelt be changed on a Hyundai Atos 2020?

VTi and THP engines are chain-driven; others have a timing belt, which should be changed every 10 years or 80,000 to 160,000 miles.

How do I know if my cam is flat on a Hyundai Atos?

Pull the vavle covers and wacth the rockers arms either turn the motor by hand or you can bump the motor with the starter if 1 or a couple arms dont have full movment as the rest most likly you have a cam that went flat on you. measure how far the valve stem depresses into the head as the valve opens.
If you feel that something wrong with information above, so warn us about that!
Post your comment


Comments on how to fix camshaft on a Hyundai Atos:
Bailey
Hello., i am re-assembling my engine due to engine failure because of coolant leaking and mixed with oil in the engine, and i have some questions, Ive ordered the steel coolant pipes from sharkwerks and i am changing all the radiator and coolant pipes, is there any thing you would recommend that i have to change since my engine is still out? 220k miles on 2009 997 turbo engine. Thank you
Verge
How is cam held when tightening bolt if engine still in vehicle?? Also cam tool is cool but cant be used if engine still in vehicle, or can it if grille removed?.. awesome video..
Hanlon
I would say start with a OBDII scanner at autozone and see if a code comes up, thats the best way...let me know how it goes..it could just be some many things..sorry... CJ
Wilma
Thank you for sharing and actually showing HOW to do it. I’ll be doing it myself. Thanks again!!
Carver
Great thing to be able to do this stuff yourself! I wouldn't dare to go that deep into the bike! But your video makes it look easy. I know it's not! Hahahahah! Awesome job! Ride safe brother!
Kaela
idol Maninoy ask ko lang kung ano tapet clearance ng intake at exhaust ng R2 baka pwede naman gawa ka video nito salamat Idol
Afia
how to changhe oil filter on a 2 C diesel engine its too tight space i tried to use a chain tool but i couldnt turn it? its on a corolla last oil or service that shows on the previous owner card was 266 k and now its nearly to turn 275 k i check car info web site says every 10.000 kmh
Strong
So can you just get the non mds cam and keep the same mds lifters?
Talbot
Nissan Elgrand 2019 Interior Exterior
Colyn
Thanks
Leia
Did the carb spacer help the hot starts?
Tekle
Boa tarde congrats carro icon thrifimaster Tor of details parto vai amém bom trabalho c-10 era
Chance
nice front lip at 43 seconds i looking for one like this cant find it anywhere
Scanlan
So I’m rebuilding my 350 and I’m wanting to cam it but would like to keep stock lifters and whatnot could i do that with a thumpr cam
Willem
Please help!! I have a 17 ... Today my check engine light came on and while I was driving it keep cutting off. I made it to a shop and got an oil change thinking that was the problem but it wasn't...it kept dying Everytime I push the gas after I break..I think it might be this problem. Can you tell me if it might be something else and most importantly is it bad to keep starting it up when it dies?? Knowing I have to get where I gotta go...please somebody help me
Dene
it's like a silent film
Oakley
nice, i have one, and its make 230 hp :-)
Sterne
CAN I REPLACE THE BANK ONE SENSOR WITH OUT REMOVING THE WHOLE INTAKE OFF?
Zahid
surfe is up!!! I lIKE IT!! take care
Ozi
WHat is the price for this engine?