Real Auto Mechanic's Guides and Recommendations.

How to repair receiver dryer on Gonow Aoosed G5

Heating & Air Conditioning Professional
Richard Walker
Interesting how to remove receiver dryer in your automobile, I’ll show you the instructions for receiver dryer replacement step-by-step!

What is the most common component that will cause abnormal noises in the A C system on a Gonow Aoosed G5?

The most common issue associated with an air conditioner screeching noise is a malfunctioning fan motor in the outdoor condenser unit. The central air conditioning system connected to your home features a fan that is designed to remove heat from the refrigerant.

When should I replace my dryer receiver on a Gonow Aoosed G5?

The receiver dryer must be regularly replaced. It is recommended that the receiver dryer is replaced every second year or whenever the circuit has been opened. Always install a new receiver dryer any time the compressor is replaced and always when a serious leakage has been noticed and repaired.

How do I know if my accumulator is bad on a Gonow Aoosed G5?

  1. Rattling noises during operation. One of the first warning signs that an accumulator has failed is a rattling noise when the AC is turned on
  2. Noticeable refrigerant leaks. Another more obvious and more serious sign that an accumulator has failed is a visible refrigerant leak
  3. Moldy smell when the AC is on

What causes a AC drier to freeze up on a Gonow Aoosed G5?

The problem of car AC lines freezing up is caused by moisture that has been introduced into the system. At the expansion valve or fixed orifice tube, depending on the system, liquid refrigerant quickly expands into a gas, forcing the temperature to drop.

Which way does a receiver drier go?

How the AC Receiver Drier and the AC Accumulator Work - In between the AC condenser.

How do I know if my Txv is bad?

To diagnose a bad TXV, look for:
  1. Low evaporator pressure
  2. High evaporator and compressor superheats
  3. Low compressor amp draw
  4. Short cycling on the low-pressure control
  5. Higher than normal discharge temperatures
  6. Low condensing pressure
  7. Low condenser split
  8. Normal to high condenser subcooling

How do you test a filter drier on a Gonow Aoosed G5?

How can you tell if you have a clogged liquid line filter drier? If there is a noticeable temperature drop from one side of the filter drier to the other, this means that there is a pressure drop. Remember that temperature follows pressure and temperature is something that we can measure on the outside of the tubing.

How much oil do you put in a new AC dryer on a Gonow Aoosed G5?

Put 2 ounces in the drier and maybe an ounce in the discharge line at the compressor. Remove the compressor as you said you were going to anyway, remove dryer, replace hose, flush system, drain all oil out of compressor and add 10 ounces pag oil. Install compressor and new dryer, pump down.

What is the purpose of a filter drier in an Gonow Aoosed G5 air conditioning system?

It is important to locate a filter-drier in a refrigeration system. Its role is to remove moisture from the refrigerant and lubricant by absorbing and retaining moisture deep within the desiccant granules.

Do you have to replace the receiver drier when replacing AC compressor on a Gonow Aoosed G5?

So when should you replace it? The simple answer is this: the AC dryer should be replaced any time your AC system is opened for service. While this may seem unnecessary to some mechanics, most would agree that this is a good rule for replacing the AC dryer.
If you feel that something wrong with information above, so warn us about that!
Post your comment


Comments on how to fix receiver dryer on a Gonow Aoosed G5:
Reilly
I see you have connect your appion core removal tool directly to the compressor, thas ferrary uses a different connectors? compare to standard.
Atmore
When you check the pressures should the engine be at idle or at higher rpms?
Marina
Mohon di jawab om mau tanya, mobil saya jazz idsi, mesin klo baru nyala AC nya dingin tp kalo uda terlalu lama AC lama2 panas baru isi preon dan kipas semua msh muter normal, kemungkinan bisa termostat rusak atau waterpump ya jd ga sirkulasi atauga ngaruh dan ada kerusakan lain? Thanks
Terell
good job so far thumbs up and shared
Lily
my wife has the same vehicle and started making a really bad noise. I took a glance around and noticed the compressor pulley wobbles a bit but still blows cold. Was yours still working and just had a noise?
Milford
What gives the indication of the dryer needing to be replaced?
Herrick
I have an 05 envoy, 4.2L. I've replaced the compressor 3 times. The system is charged and the AC clutch is snapping on but I still don't get cold air. Could you help me ... shoot. I'm at a loss for answers.
Moore
Nama: Muhammad nur qhohar Kls: XII TKR 3 NO: 02
Kirkley
lmao, yer :D
Fakih
Nama:Roni whayu p.p Kelas:Xll TKR 3 No abs:20
Colten
Hi Jim, I have a 2007 Avalon tha air has a bad smell with ac on or off. Any tips on how to get rid of the smell. Thanks
Korian
mau tanya om.. untuk xenia 2007 knob blower diputar tapi knob suhu off.. apa emang gak keluar angin?
Husnain
Big job.
Finlay
NAMA :WIBOWO ADI SAPUTRO KELAS :XII TKR 3 ABSEN :36
Matias
What an utter... piece... of... garbage. China wouldn't even find a way to recycle that rotted out crap into children's toys. There are not enough trolls in this solar system to lick the deposits off those desiccated balls to bring joy to anyone. You could sacrifice that festering ferrous chalice to the rust god and he would give you the middle finger before completely kicking your ass. What a piece of crap you took apart.
Renshaw
Did you have to go thru the dash to loosen any bolts for the expansion valve?
Bret
10:27pm
Larissa
Always enjoy watching your videos. Where service if any, do you use for wiring diagrams (Mitchell, Identifix)? Thanks
Golden
Terimakasih ilmunya...untuk tulisan agak buram...mohon kedepanya lebih jelas...terimak asih..sukses selalu.
Hartman
speeddemon1092 this is the first time ive have watched one of his videos that was under 300+ views
Abner
thanks for the vid. by any chance do you know what brand clutch removal tool you used?
Plat
Mantap
Kong
what that shot in there
Beverley
I don't even know what the hell you are talking about in most of this video and your other videos but i love watching you tinkering with hings..